Chevy Trax Forum banner

1 - 3 of 3 Posts

·
Super Moderator
Joined
·
1,571 Posts
Discussion Starter #1 (Edited)
This morning I received a third FOB I had ordered from Ali-Express and wanted to share my experience.

3479



I didn't want to cut the key before I knew the FOB would work, so here is the procedure I took.

Insert original key


2020-07-27 13.04.17.jpg



Turn to "ON" without starting the engine.


2020-07-27 13.04.25.jpg



Turn back to "OFF" and completely remove the key.
Then caulk the key and insert in the ignition with icons facing you.


2020-07-27 13.04.43.jpg



Then you will need to hold the new keyFOB so the transponder is directly above the key in the ignition. Icons will be facing away from you on the new keyFOB like this. ( Hard to take good picture with only 2 hands )


2020-07-27 13.05.40.jpg



Then turn both FOBs to the "ON" position for a few seconds then "OFF" again and pull key out of the ignition. Try your new remote if it works good you can now get the key cut.


2020-07-27 13.06.44.jpg



I was tired of being ignorant so I had to do this. Now I know. KeyFOB works great. On my way now to the locksmith to get the key cut.
 

·
Super Moderator
Joined
·
1,571 Posts
Discussion Starter #2
Back from the locksmith and everything works great
 

·
Super Moderator
Joined
·
1,571 Posts
Discussion Starter #3
This key fob had the Buick circle indent on the back today I changed it to a Chevrolet logo.
3501


3502


3503


3504
 
1 - 3 of 3 Posts
Top