Does Remote Link show Tire Pressure?

Mine is the same way.

Thanks chomrich.

Hi everyone- I have the same issue with my remote link also .

I'm coming from a 2012 Sonic and the Remote Link worked great. With the 2015 Trax I got yesterday, the tire pressure doesn't show. I contacted Onstar and the person I spoke with said she would start a trouble ticket.

It I get an answer I'll let you know.

Mine didnt show either but when I put on a set of Chevy Cruze wheels with TPMS sensors it threw a tire pressure dash light. I ordered a reset too so when I get it I'll let everyone know the results.

By reset, is that from OnStar or from the dealer?

No it is a tool for resetting, specifically it is Kent-Moore EL-50448 TPMS reset tool

Seems like something that can even be performed by an independent shop if that's an option some folks want to exercise.

Follow up. I reset all the tires with the TPMS relearn tool. Worked exactly as the Trax owners manual said it should. I still cannot get tire pressure on remote link though so that wasn't it. Can tire pressure be accessed using the driver information center? If you can, I couldn't figure it out.

Easy tool to use though for future tire rotations and change over to winter tires.

c502cid said:

Follow up. I reset all the tires with the TPMS relearn tool. Worked exactly as the Trax owners manual said it should. I still cannot get tire pressure on remote link though so that wasn't it. Can tire pressure be accessed using the driver information center? If you can, I couldn't figure it out.

Easy tool to use though for future tire rotations and change over to winter tires.

Click to expand...

From what I can tell from the manual, the only thing we have is a light that comes on if one of the tires is low -- but not the actual psi.

However, somewhere on the forum, can't remember where now, I read that there are problems with 2015 Onstar modules -- my dealer confirmed it. I was hoping to get in today, but now it looks like Thursday before I'll be able to stop by the dealer. Service manager said they would have to get a number off the current module and then order a new one. I'm hoping that will fix the problem of not being able to see the tire pressure on RemoteLink. Seems like I used that thing all the time on my Sonic, so I really hope this will fix it.

What I think would be a good thing to do is keeping a cheap tire pressure gauge (not digital) just to double check your tire pressures. Never know when these sensors can be faulty or lose their calibration or something.

At least then you won't be that guy running dangerously low on 10psi!!

c502cid said:

Follow up. I reset all the tires with the TPMS relearn tool. Worked exactly as the Trax owners manual said it should. I still cannot get tire pressure on remote link though so that wasn't it. Can tire pressure be accessed using the driver information center? If you can, I couldn't figure it out.

Easy tool to use though for future tire rotations and change over to winter tires.

Click to expand...

Thanks for the follow-up. It would be nice if the GM customer service rep who has visited the forums could chime in.

dbither said:

Thanks for the follow-up. It would be nice if the GM customer service rep who has visited the forums could chime in.

Click to expand...

Contacting them directly (Private Message) about topics like this might be the best way to get them here sooner

Customer Service Rep - http://www.traxforum.com/forum/members/1570-chevrolet-customer-care.html

I'm having the same problem with Remote Link and the website. Website tells me my vehicle diagnostic information is temporarily unavailable -- same thing it's been saying since day 1.

I ran by the dealer this morning and they tell me it's an Onstar problem (which the Onstar tech advisor confirmed). Onstar has started a trouble ticket, but I got the impression this is pretty widespread.

If you haven't called Onstar yet, maybe you should place the call and get your name on the list.

I think since the DIC in the vehicle does not display this information, OnStar will not either. OnStar pulls the information from the BCM so if it's not stored in that module then they will not have it either.

ChevyMgr said:

I think since the DIC in the vehicle does not display this information, OnStar will not either. OnStar pulls the information from the BCM so if it's not stored in that module then they will not have it either.

Click to expand...

That makes sense, but the OnStar folks say it should show and I should go to the dealer and have them check the BCM module. I don't want to waste their time so I'm holding off until I get an oil change.

Tire pressure showed on my 2012 Sonic.

Went to my dealer and they told me since the light is on indicating Onstar is working, it's an Onstar problem. I now have a trouble ticket in with Onstar and hoping for an answer soon.

Cinsue said:

Tire pressure showed on my 2012 Sonic.

Went to my dealer and they told me since the light is on indicating Onstar is working, it's an Onstar problem. I now have a trouble ticket in with Onstar and hoping for an answer soon.

Click to expand...

Hopefully it actually is an issue on their end that won't involve any further running around, if not it'll at least help narrow down what this actually is for future members to go off of.