Chevy Trax Forum banner
1 - 14 of 14 Posts

·
Registered
Joined
·
9 Posts
Discussion Starter · #1 ·
Hello

Need some help. I did a compression test on my 2015 trax and now it won't start. I ha e replaced the spark plugs and coil. Any help would be great.
Thanks Aaron
 

·
Administrator
Joined
·
2,663 Posts
You must have accidentally disconnected something or forgot to re-connect the coil pack.
 

·
Administrator
Joined
·
2,663 Posts
Did you try swapping the old pack back in?
 

·
Administrator
Joined
·
2,663 Posts
Maybe it's just flooded, did you disconnect the fuel pump when turning it over for the compression test?
 

·
Administrator
Joined
·
2,663 Posts
Pedal to the floor, crank it for 4 or five revolutions, if it still doesn't start it must be something else.
 

·
Registered
Joined
·
9 Posts
Discussion Starter · #10 ·
Ive tryed the peddle to the Flore, Ive taken the spark plugs out and let it set to try and evaporate the fuel. Swapped new and old coil pack, check all fuses. I'm at a lost of what to try next. It still will crank but will not start.

Thanks
 

·
Administrator
Joined
·
2,663 Posts
Did you install ACDelco dual iridium plugs?
 

·
Administrator
Joined
·
2,663 Posts
Did you check the pins in the connector to see if one wasn't bent? Never know...
 
1 - 14 of 14 Posts
Top