Chevy Trax Forum banner

Engin won't start after a compression test

2K views 13 replies 3 participants last post by  Smit999 
#1 ·
Hello

Need some help. I did a compression test on my 2015 trax and now it won't start. I ha e replaced the spark plugs and coil. Any help would be great.
Thanks Aaron
 
#6 ·
Maybe it's just flooded, did you disconnect the fuel pump when turning it over for the compression test?
 
#8 ·
Pedal to the floor, crank it for 4 or five revolutions, if it still doesn't start it must be something else.
 
#10 ·
Ive tryed the peddle to the Flore, Ive taken the spark plugs out and let it set to try and evaporate the fuel. Swapped new and old coil pack, check all fuses. I'm at a lost of what to try next. It still will crank but will not start.

Thanks
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top