[galardfe]

I just bought a 2016 Trax today and the exterior temp that reads on the display is stuck in celsius and I cannot find how to change it to Fahrenheit....any suggestions?? I've looked on Google and there is nothing

 

[beeguz]

Try this see if it changes

Units
This menu is not available while the
vehicle is moving. Press SET/CLR
while the unit display is active and
move
wx
to change units when
UNIT SET is displayed. Press SET/
CLR to confirm the setting. Select 1,
2, or 3 for the unit display. 1 is
Imperial units, 2 is US units, and 3
is metric units. This will change the
displays on the cluster and DIC to
the type of measurements selected

 

[James]

Try this see if it changes

Units
This menu is not available while the
vehicle is moving. Press SET/CLR
while the unit display is active and
move
wx
to change units when
UNIT SET is displayed. Press SET/
CLR to confirm the setting. Select 1,
2, or 3 for the unit display. 1 is
Imperial units, 2 is US units, and 3
is metric units. This will change the
displays on the cluster and DIC to
the type of measurements selected

Great reply. Isn't that in the owners manual?
If this does turn out resolving the issue then this should be included in some helpful tips sticky.

 

[beeguz]

Yes that was from the on line owners manual, which is easier to use, because you can click on the subject then go right to the correct page to read about the subject.

If anything should be a sticky it should be the online owners manual.