[azteckman74]

Hi,
I really appreciate your advice on this matter.
I am from Mexico and I am the owner of TRAX LS 2017 (Manual transmission, 1.8lt) and I would like to install White Angel Eye With FOG light. I read a little bit of it but I don't have clear if I need to buy also a module to fix/prevent a CANBUS error.

Thanks in advance for your comments.

 

[Traxy]

Do you currently have Fogs? Where do you plan on powering you Angel Eyes from? You shouldn't need a protection module if you don't power from the BCM.

 

[azteckman74]

Do you currently have Fogs? Where do you plan on powering you Angel Eyes from? You shouldn't need a protection module if you don't power from the BCM.

Hi Traxy, thanks for your support, currently I do not have fogs lights (My Trax version did not have this equipment), my idea is to install a relay and took as control signal the high beams to provide the 12V from the battery to the fogs ligths.

 

[Traxy]

You will probably need a dual relay setup like this. If you want them to be on all the time except high beams just swap the +low for Ignition voltage.

 

[Demented]

You will probably need a dual relay setup like this. If you want them to be on all the time except high beams just swap the +low for Ignition voltage.

Where can you get this relay and how did you hook up the power side (what wires or connector did you attach to?

 

[Demented]

Where can you get this relay and how did you hook up the power side (what wires or connector did you attach to?

Found the relay on EBay, just need a better understanding how you hooked up to wiring

 

[Traxy]

Just like my diagram shows except park lights instead of low beam. It works great and as been doing so for 3 years now. Love this setup.