Chevy Trax Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
Hi All,


I believe I will need to bring my 2016 Trax to dealer to get serviced, but I thought I would check with you first to see if it's a fuse or something stupid. The issues are as follows:

  • The reverse camera works, but I am only getting part of the grid. The grid option is enabled.
  • Once in a while MyLink starts very dim, and takes a couple of minutes to become usable.
  • None of the controls on the steering wheel work.
Please advise, thanks
Dave
 

·
Registered
Joined
·
772 Posts
Yes that sounds like you need to take it back in, if it didn't work at all then it might be a fuse problem but you have some function so the unit is getting power.

Software might need to be re-flashed or the unit replaced, in today's world of doing it the easy way, they will more than likely just replace the whole unit with a new one.

Problem is they are not going to have a new one there, they will have to order one then install it on a later date.
 
1 - 2 of 2 Posts
Top