Chevy Trax Forum banner
1 - 2 of 2 Posts

· Registered
772 Posts
I ran my fog light wires through the firewall near the steering column there is a rubber seal that you can push through.

I used needle nose pliers, put the wire in the closed jaws of the tool, to push it through, then I pull what wire you need off the roll of wire.

The rubber will seal around the wire, you don't have to worry about chafing or sealing a hole.
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.